What to do if the automatic sealing machine gets stuck in the box
Release time:
2024-04-24
1. Width or height adjustment too small Automatic sealing machines manually adjust the corresponding width and height when conveying cardboard boxes. However, during the adjustment process, due to the operator's unfamiliarity with the machine or operational errors, box jamming may occur.
1. Width or height adjustment too small
Automatic sealing machines manually adjust the corresponding width and height when conveying cardboard boxes. However, during the adjustment process, due to the operator's unfamiliarity with the machine or operational errors, box jamming may occur.
Solution: A better solution is to place the cardboard box on the workbench of the sealing machine, and then compare and adjust it to ensure the length of the conveying ruler.
2. The cardboard box is too light to pass through the movement
To fully understand the performance characteristics of the equipment, one should have a comprehensive understanding of its advantages and disadvantages in terms of performance, or simply say the working principle of the sealing machine. The principle of automatic sealing machine sealing tape is to rely on the sealing machine to press the cardboard box and hit the guide roller during the conveying process, thereby achieving the sealing of the tape onto the cardboard box. However, if the cardboard box is too light during this process, it may not be able to collide with the guide roller, which can directly lead to the occurrence of box jamming.
3. The tape is not cut off
This will result in the cutter not being sharp enough to cut the tape continuously, and the continuous cutting of the tape will cause the cardboard box to get stuck in the sealing machine and cannot continue to be transported.
Solution: Regularly clean or replace the cutting blade to ensure its sharpness.
Related News
